Joe Baker Equipment Sales, Inc.

                      (888)440-9429                                          

Berco STC361 1300/C Hydraulic Surface Grinder

Berco STC361/1300 Hydraulic Surface Grinder

August 1, 2007 Supersedes November 7, 2006

240 Volt, 60 Cycle, 3Ø                                                                        Floor Space Requirements 177"x38"x58"

Work Capacity 48"                                                                              Maximum Height From Table To Insert 26.37"

Maximum Milling Width 15.75"                                                          F.O.B. NORFOLK, VA

Variable Table Feed                                                                          Shipping Weight 3,600 LBS.

                                                                                                               $ 28,940.00

Standard Equipment List

Balancing Arbor                                                                                     8" Starrett Precision Level (75001)

Milling Hub 16" (A00A31736)                                                              Adjustable Jack Kit (40500)

CBN Tool Holders (2) (85000)                                                             Cylinder Stud Kit (40501)

1/2" CBN Insert (82000)                                                                        Universal Cylinder Head & Block Fixture (40700)

1/2" PCD Insert (82001)                                                                        Pair Parallels 3 5/32" (A00A31804)

Downfeed Indicator Assembly (90000)                                                Pair Parallels 5 5/16" (A00A31805)

Set Of Splash Guards                                                                            Operators Manual

Quart Way Oil (17510)

Optional Equipment

Pair 8" Parallels (98500)                                                                        $     395.00

12" Starrett Level (75000)                                                                      $     185.00

Linear Downfeed Assembly (90002)                                                    $      750.00

35" Straight Edge (75025)                                                                     $        41.00

Wet Segment Surfacing Option

Segmental Wheel Holding Plate                                                            $   1,750.00

Set Of 10 Grinding Segments (U8200519001)                                   $       150.00

Segmental Wheel Plate Puller                                                               $        175.00

Dressing Arm & Dresser                                                                        $        225.00

Coolant Tank & Pump                                                                             $     1,000.00

Suggested Replacements

1/2" CBN Insert (82000)                                                                         $         159.00

1/2" PCD Insert (82001)                                                                         $         199.00

1/2" CBN Tool Holder (85000)                                                              $          158.00

Adjustable Jack Kit (40500)                                                                   $          200.00

Cylinder Head Stud Kit (40501)                                                             $             10.00

2" Dial Indicator (95000)                                                                          $          125.00

Downfeed Indicator Assembly (90000)                                                  $           350.00

Universal Cylinder Head Mounting Fixture (40700)                              $        1,600.00

5 Gallons Coolant (JBCIMCOOL)                                                           $             87.00

Winfield Fixtures

DSF1000 Installed In Machine In Place Of Universal Fixture & Parallels                    $   31,025.00

DSF1500 Installed In Machine In Place Of Universal Fixture & Parallels                    $   31,425.00

DSF2000 Installed In Machine In Place Of Universal Fixture & Parallels                    $    32,875.00

DSF35730 Winfield V-Block Mounting Package (DSF1500 Only)                             $      1,499.00

DSF35710 Universal Rollover Fixture                                                                             $         525.00

    **All Prices, Specifications, Standard & Optional Equipment Are Subject To Change Without Notice**

                    We now accept the following credit cards:      

                    Prices and shipping costs:           

All prices are F.O.B. Cincinnati, Ohio.  Price does not include freight charges, lumber cost for shipping crates or any other special handling, if required.  Prices are subject to change without notice.

 

 

Also, visit:  www.winfieldfixtures.com

 

Warehouse:  1000 Devils Backbone Road

                        Cincinnati, OH 45233

                        (888)440-9429  8am-5pm EST

                        (513)451-1327

                        (513)451-9429  Fax

                        (800)522-9429 Repair Parts

E-Mail:             bakerequip@joebakerequipsales.com

                      

Webmaster for  questions or comments about this web site.

Copyright @2003 Joe Baker Equipment Sales Inc.

Last Modified: 03/13/2008 08:29:02 AM

           

 

Send mail to tammy@joebakerequipsales.com  with questions or comments about this web site.
Copyright © 2003 Joe Baker Equipment Sales Inc
Last modified: 03/13/2008 08:29:31 AM