T10 Roltray Filter $825.00
Crankshaft Grinders & Related Equipment
|
50303 |
Scledum RG200/230/280 Chuck 175MM 6 Jaws | $2,315.00 each |
|
50301 |
Berco RTM225/270 Chuck 180MM 6 Jaws | $ 1,575.00 each |
| 50307 | Berco RTM225/270 Chuck 180MM 9 Jaws | $ 2,250.00 each |
| 50314 | Robbi 180MM Chuck 6 Jaws | $ 1,895.00 each |
| 50316 | Robbi 180MM Chuck 9 Jaws | $ 2,450.00 each |
| 50300 | Berco RTM300 Chuck 200MM 6 Jaws | $ 1,750.00 each |
| 50302 | Berco RTM300 Chuck 200MM 9 Jaws | $ 2,220.00 each |
| 50306 | Winona Van Norman Chuck 200MM 6 Jaws | $ 2,178.00 each |
| 50306A | Winona Van Norman Flange | $ 518.00 each |
| 50304 | Berco RTM351 Chuck 230MM 6 Jaws | $ 3,150.00 each |
| 50308 | Berco RTM351 Chuck 230MM 9 Jaws | $ 3,450.00 each |
| 50305 | Berco RTM425 Chuck 315MM 6 Jaws | $ 3,575.00 each |
| 50309 | Berco RTM425/575 Chuck 315MM 9 Jaws | $ 3,800.00 each |
| #1473 | Used Berco RTM225,226 & 270 Crankshaft wheel hubs-very nice-like new-hard to find | $ 445.00 each |
| #1473A | Used Berco Wheel Hub Weights for RTM225, 260 & 270 hubs | $ 15.00 set |
| #1672 | Stuhr 14" Static Wheel Balancer | $ 395.00 |
| #1687 | Berco RTM350 Steady Rest- Last new one available | $ 1,500.00 |
| #1715 | Jamison RD-28 Universal Crankshaft Wheel Dressing Tool-Save | $ 450.00 |
| #1749 | Berco RTM270B Crankshaft Grinder 77" capacity with hydraulic wheel dresser, hydraulic steady rest, hydraulic locking pins, standard steady rest, 2 hubs with new wheels, like new OMAP Chucks- To be reconditioned | $ 43,500.00 |
| #1750 | Magnaflux DR100 100" Capacity, 16" coil with end shot capability, cable capability De Mag Cycle 220 3 phase | $ 4,250.00 |
| #1751 | Storm Vulcan CSP-78 Crankshaft Press 78" Capacity -to be reconditioned | $ 1,950.00 |
| #1753 | Gleason M-1 Crankshaft Welding Machine with all standard tooling, tested & ready to ship | $ 10,500.00 |
| #1754 | Storm Vulcan 15A Special Crankshaft Grinder with 5 wheels & hubs, Arnold Gauge, all coolant system, mounted polishing arm, on chucks not centers-very nice | $ 13,500.00 |
| #1755 | Storm Vulcan CSP-48 Crankshaft Press 48" Capacity- to be rebuilt | $ 2,250.00 |
| Hard To Find | Early Style Hubs for small spindle taper for RTM225 | $ 300.00 |
| **NEW** | Camshaft Grinding Wheels for Berco RAC1500/2130 Camgrinders 7/8", 1 1/4" & 1 1/2" Widths | $ 75.00 each |
| "Special" |
Mario Pinto 10" RTM350 Chucks $750 Each or $1,400 per Pair |
|
| Arnold Gauge Tooling & Repair Parts In Stock | ||
|
|